Asus SL1000 - Manual (Page 96)

Chapter 9. Configuring Firewall/NAT Settings Internet Security Router User ’s Manual
80
Figure 9.32. NAT Pool Example – Associate a NAT Pool to an ACL Rule
9.7.4 Configuring Time Range
With this option you can configure access time range records for eventual association with ACL rules. ACL
rules associated with a time range record will be active only during the scheduled period. If the ACL rule
denies HTTP access during 10:00hrs to 18:00hrs, then before 10:00hrs and after 18:00hrs the HTTP traffic will
be permitted to pass through. One time range record can contain up to three time periods. For example:
Office hours on weekdays (Mon-Fri) can have the following periods:
„ Pre-lunch period between 9:00 and 13:00 Hrs
„ Post-lunch period between 14:00 and 18:30 Hrs
Office hours on weekends (Saturday-Sunday) can have the following periods:
„ 9:00 to 12:00 Hrs
Such varying time periods can be configured into a single time range record. Access rules can be activated
based on these time periods.
9.7.4.1 Time Range Configuration Parameters
Table 9.10 describes the configuration parameters available for a time range.
Table 9.10. Time Range Configuration Parameters
Field Description
Time Range drop-
down list Select "Add New Time Range" to add a new time range or select an existing
time range from the drop-down list.
Time Range Name Enter a name for the Time Range.
Schedule drop-down
list Select "Add New Schedule" to add a new schedule or select an existing
schedule from the drop-down list.
Days of Week Set the days for the schedule.
Time (hh:mm) Set the time windows for the schedule in hh:mm format.
NAT type drop-down list
NAT pool drop-down list