Asus RS160-E2 - Manual (Page 32)

C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p C h a p t e r 2 : H a r d w a r e s e t u p 2 - 1 4 2 - 1 4 2 - 1 4 2 - 1 4 2 - 1 4
2.6 External SCSI port
The barebone system includes a slot
on the rear panel for the external SCSI
port. You need to install the SCSI
cable that came with your system
package if you wish to connect
additional SCSI drives.
External SCSI slot
2.6.1 2.6.1 2.6.1 2.6.1 2.6.1 Removing the slot cover Removing the slot cover Removing the slot cover Removing the slot cover Removing the slot cover
To remove the external SCSI slot
cover, insert the end of a flat screw
driver into the hole at the center of
the slot cover to knock it out.
The slot opening appears as shown
after you have removed the slot
cover.