Asus P6-P5G41E - Manual (Page 53)

4-16 Chapter 4: BIOS setup
4.4.2. Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an
item then press <Enter> to display the sub-menu.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections
may cause system to malfunction.
North Bridge Configuration
Configure North Bridge
features.
North Bridge Configuration
ENABLE: Allow
remapping of
overlapped PCI memory
above the total
physical memory.
DISABLE: Do not allow
remapping of memory
North Bridge chipset Configuration
Memory Remap Feature [Enabled]
Initiate Graphic Adapter [PEG/IGD]
IGD Graphics Mode Select [Enabled, 128MB]
GTT Graphics Memory Size [No VT mode, 2MB]
DVMT Memorry [256MB]
Protect Audio Video Path Mode [Lite]
Memory.Remap.Feature.[Enabled]
Allows you to enable or disable the remapping of overlapped PCI memory above
the total physical memory. Configuration options: [Enabled] [Disabled]
Initiate.Graphic.Adapter.[PEG/IGD]
Allows you to select the graphics controller as the primary boot device.
Configuration options: [IGD] [PEG/IGD]
Intel(R) C-STATE Tech [Disabled]
Allows you enable or disable the Intel ® C-STATE Technology. When enabled, the CPU idle is
set to C2/C3/C4. Configuration options: [Disabled] [Enabled]