Asus PIKE 2208 - Manual (Page 21)

ASUS PIKE 2208 2-7
Here is a description of the options listed on the left of the main WebBIOS CU
screen:
• Advanced Software Option: Select this to allow you to enable the special
functionality or features that may not be available in the standard configuration
of the controller.
• Controller Selection: Select this to view the Adapter Selection screen, where
you can select a different SAS adapter. You can then view information about
the controller and the devices connected to it, or create a new configuration on
the controller.
• Controller Properties: Select this to view the properties of the currently
selected SAS controller.
• Scan Devices: Select this to have the WebBIOS CU re-scan the physical and
virtual drives for any changes in the drive status or the physical configuration.
The WebBIOS CU displays the results of the scan in the physical and virtual
drive descriptions.
• Virtual Drives: Select this to view the Virtual Drives screen, where you can
change and view virtual drive properties, initialize drives, and perform other
tasks.
• Drives: Select this to view the Drives screen, where you can view drive
properties, and perform other tasks.
• Configuration Wizard: Select this to start the Configuration Wizard and create
a new storage configuration, clear a configuration, or add a configuration.
• Logical View: Select this to toggle between the Physical View and Logical
View screens.
• Events: Select this to view system events in the Event Information screen.
• Exit: Select this to exit the WebBIOS CU and continue with system boot.