Asus RS300-H8-PS12 - Manual (Page 42)

Chapter 2: Hardware setup 2-20
1
2
2.8 Removable/optional components
You may need to remove previously installed system components when installing or removing
system devices. Or you may need to install the optional components into the system. This
section tells how to remove/install the following components:
1. System fans
2. ASUS ASMB7-iKVM (optional)
Ensure that the system is turned off before removing any components.
2.8.1 System fans
To reinstall the system fans:
1. Align and insert the fan into the fan slot.
To uninstall the system fans:
1. Disconnect the system fan cable from
the fan connector on the motherboard.
2. Lift the fan and set aside.
3. Repeat steps 1—2 to remove the other
fans.
2. Ensure that the rubber anchors are fitted neatly on the fan slot notches.