Asus Q87T - Manual (Page 29)

ASUS Q87T 1-21
1.8 Onboard LEDs
1. Standby Power LED
The motherboard comes with a standby power LED that lights up to indicate that the
system is ON, in sleep mode, or in soft-off mode. This is a reminder that you should
shut down the system and unplug the power cable before removing or plugging in any
motherboard component. The illustration below shows the location of the onboard LED.
Q87T
Q87T Onboard LED
SB_PWR
Q87T
Q87T DMIC connectors
PIN 1
+3.3V DMIC_DATA DMIC_CLK GND
DMIC
17. DMIC connectors (4-pin DMIC)
The DMIC connector is for connecting the digital microphone module used in All-in-One
chassis.