Asus CG8580 - Manual (Page 84)

8 Chapter 6: Using the utilities
English
English
English
English
Recovering.the.partition
This procedure allows you to delete the Intel
® Rapid Start Technology from your system, and
recover the partition you made for the Intel Rapid ® Start Technology installation.
Run the.Command.Prompt.tool.
Type diskpart and press Enter.
At the diskpart prompt, type
list disk after DISKPART,
and press Enter..
Select the disk (SSD) where the
Intel ® Rapid Start Technology
is installed for volume recovery,
type select disk x..
(x = number), and press Enter.
1.
.
.
4.
The value “x” refers to a disk number where you want to delete the store partition.
. Tick On.in the Status field to enable the function, and click Save.
Click.to.enable.or.
disable.battery.
saving.mode..This.
function.only.applies.
to.notebooks.
Select.and.click.to.enable.
or.disable.the.function
Click.to.enable.or.disable.the.timer..When.enabled,.move.
the.scroll.bar.to.the.desired.time..When.the.system.is.
idle.for.more.than.the.time.period.you.set,.the.system.
automatically.goes.into.the.Intel ® .Rapid.Start.mode..
Default.time.is.10.minutes.
Click.to.save.the.
settings.made.
Click.to.cancel.the.
settings.made.