Asus P5N7A-VM - Manual (Page 82)

2-30 Chapter 2: BIOS setup
2.5.4 APM Configuration
Select Screen
Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Restore on AC Power Loss [Power Off]
APM Resume Event Configuration
Power On PCI Wake [Disabled]
Power On PCIE Wake# [Disabled]
Power On LAN(MAC) [Disabled]
Power On Ring [Disabled]
Power On PS/2 Keyboard [Disabled]
Power On RTC Alarm [Disabled]
BIOS SETUP UTILITY
Power
Restore On AC Power Loss [Power Off]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state, whatever the system state
was before the AC power loss. Configuration options: [Power Off] [Power On] [Last
State]
Power On PCI Wake [Disabled]
Allows you to enable or disable the PME to generate a wake event. Configuration
options: [Disabled] [Enabled]
Power On PCIE Wake# [Disabled]
Allows you to enable or disable the PCIE PME to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power On LAN(MAC) [Disabled]
Allows you to enable or disable the LAN(MAC) to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power On Ring [Disabled]
Allows you to enable or disable RI to generate a wake event.
Configuration options: [Disabled] [Enabled]
Power On PS/2 Keyboard [Disabled]
Allows you to enable or disable PS/2 Keyboard to generate a wake event.
Configuration options: [Disabled] [Enabled]
Options
Power On
Power Off
Last State