Asus P3B-F - Manual (Page 103)

103 ASUS P3B-F User’s Manual
7. APPENDIX
7. APPENDIX
UltraDMA66 PCI Card
Windows NT
If you’re installing UltraDMA/66 under Windows NT 3.51, create a floppy
disk titled “Windows NT 3.51 UltraDMA/66 Drivers.” Copy the following
files onto the root directory of the diskette: “TXTSETUP.OEM” and
“OEMSETUP.INF” from the “NT351” directory of the “UltraDMA/66 Driver”
diskette; and “ULTRADMA/66.SYS” and “DISK1” from the root directory of
the “UltraDMA/66 Driver” diskette. When prompted for drivers during the
installation of Windows 3.51. insert this diskette in drive A:.
Under Windows 4.0, insert the “UltraDMA/66 Driver” diskette in drive A:
when prompted for the drivers.
Installing Drivers During Windows NT 3.51/4.0 Installation
1. Start the system installation by booting from the Windows NT disk:
a) Floppy install: boot the system with the Windows NT installation dis-
kettes.
b) Floppyless install: boot from floppy and type “WINNT/B”. After files
have been copied, the system will reboot. On the reboot, press the “F6”
key when the message “Setup is inspecting your computer’s hardware
configuration…” appears.
c) CD-ROM disk install: boot from the CD-ROM disk and press the “F6”
key when the message “Setup is inspecting your computer’s hardware
configuration…” appears.
2. When the “Welcome to Setup” window is generated, press “Enter.”
3. In the “Setup Method” dialog box, press “Enter” to confirm “Express
Setup.”
4. Press “S” to configure an additional adapter.
5. Select “Other,” and then insert the “UltraDMA/66 Driver” diskette (for
Windows NT 4.0) or the “Windows 3.51 UltraDMA/66 Drivers” dis-
kette (for Windows NT 3.51; see “Windows NT” for more details) into
drive A:.
6. Specify “A:”, and then press “Enter.” Follow the normal installation
procedure.