Asus K8N4-E DELUXE - Manual (Page 162)

5 - 4 6 5 - 4 6 5 - 4 6 5 - 4 6 5 - 4 6 C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t C h a p t e r 5 : S o f t w a r e s u p p o r t
3. Select your desired method of configuration.
A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n A u t o c o n f i g u r a t i o n
a. Select Auto Configuration then press <Enter>.
b. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press <Enter>.
c. Press <Y> to confirm or <N> to return to the Main Menu.
MAIN MENU
Auto configuration
Manual configuration
chunk size
4K
8K
16K
32K
64K
128K
M a n u a l c o n f i g u r a t i o n M a n u a l c o n f i g u r a t i o n M a n u a l c o n f i g u r a t i o n M a n u a l c o n f i g u r a t i o n M a n u a l c o n f i g u r a t i o n
a. Select M a n u a l M a n u a l M a n u a l M a n u a l M a n u a l
c o n f i g u r a t i o n c o n f i g u r a t i o n c o n f i g u r a t i o n c o n f i g u r a t i o n c o n f i g u r a t i o n and
press <Enter>. The
following pop-up
menu appears.
b. Use the up or down
arrow keys to
select a chunk size
appropriate to your
drive usage then press <Enter>.
T I P : T I P : T I P : T I P : T I P : For server systems, use of a lower array block size is
recommended. For multimedia computer systems used mainly for audio
and video editing, a higher array block size is recommended for optimum
performance.
PHYSICAL DRIVE
0 XXXXXXXXXXX XXXXXXMB
1 XXXXXXXXXXX XXXXXXMB
2 XXXXXXXXXXX XXXXXXMB
3 XXXXXXXXXXX XXXXXXMB
c. The selection bar moves to
the Physical Drive menu.
Using the up or down arrow
keys, select a drive then
press <Enter> to set the
first drive of the RAID set.
d. Repeat step c to set the second, third and fourth drive. The
number of available drives depend on the installed and enabled
physical drives in the system.
e. The utility prompts a message to input the RAID size, use the up
or down arrow keys to set the RAID size then press <Enter>.
f. Press <Y> to confirm or <N> to return to the Main Menu.