Asus ESC2000 Personal SuperComputer - Manual (Page 96)

5-22 Chapter 5: BIOS setup
USB Functions [Enabled]
Allows you to configure the amount of USB ports to be enabled.
Configuration options: [Disabled] [Enabled]
USB Port Configure [8+4 USB Ports]
This item disappears when you set the USB Functions item to [Disabled].
Configuration options: [6+6 USB Ports] [8+4 USB Ports]
USB 2.0 Controller [Enabled]
Allows you to enable or disable the USB 2.0 controller. This item become
configurable if you set the USB Functions item to [Disabled].
Configuration options: [Enabled] [Disabled]
HDA Controller [Enabled]
Allows you to enable or disable the High Definition Audio controller.
Configuration options: [Enabled] [Disabled]
Reserved Page Route [PCI]
Configuration options: [PCI] [LPC]
North Bridge Configuration
The North Bridge Configuration menu shows the auto-detected Northbridge values.
Crystal Beach / DMA [Disabled]
Configuation options: [Disabled] [Auto]
BIOS SETUP UTILITY
Advanced
NorthBridge Chipset Configuration
NB Revision :C2
Current CSI Frequency :5.866GT
Crystal Beach / DMA [Disabled]
South Bridge Chipset Configuration
BIOS SETUP UTILITY
Advanced
South Bridge Chipset Configuration
USB Functions [Enabled]
USB Port Configure [8+4 USB Ports]
USB 2.0 Controller [Enabled]
HDA Controller [Enabled]
Reserved Page Route [PCI]
SLP_S4# Min. Assertion Width [1 to 2 seconds]
Options
Disabled
Enabled