Braun MD31 Advance Power WaterJet - Manual (Page 8)

8
Switch
The magnetic ring switch 5 on the hand piece turns the
WaterJet on and off:
Off: Switch is below the arrow
On: Slide switch over the arrow
The water impact control 1 regulates the impulse pressure:
gentle = 2, strong = 8
The water impact is continuously variable and is electronically
controlled.
Setting in operation
The cord compartment offers practical storage for the cord (d).
You only have to use as much cord as you need to reach the
socket. Guide the cord through either the left- or right hand
opening of the cord compartment (A/B).
After connecting the unit to a socket, remove the water
container
3 and fill it with lukewarm water. Then replace the
water container (with the lid 4 on) firmly onto the unit (e). Before
using the first time, allow the water to run through completely.
Take the hand piece
6 out of the magnetic holder (f), hold it into
the washbasin and turn the WaterJet on.
Using
Fill the water container 3 with water again and replace it firmly
onto the unit 2 (e). Attach one of the jets 7 onto the hand piece
6 and let it audibly click in place (g). Select the water pressure
you want with the water impact control 1 ; it is best to start with
the gentlest pressure (setting 2), especially if you tend to have
bleeding gums or if children will be using the WaterJet.
Bend over the washbasin and guide the jet to your teeth.
Then turn the unit on by activating the switch
5 . The WaterJet
impulses will start in a few seconds. Keep your mouth opened
slightly to allow the water to run into the washbasin.
Mono- and multi-jet irrigation
The jet nozzle offers both mono- and multi-jet irrigation (h):
Mono-jet irrigation: Jet nozzle in position (h1). Cleans teeth and
the spaces between them, flushing out even stubborn left-over
food particles.
Multi-jet irrigation: Jet nozzle in position (h2). Effectively
massages gums to keep them strong and healthy.
4803052_MD31_MN Seite 8 Dienstag, 7. Juni 2005 8:55 08