Chapter 3, 2 chipset, Cool‘n’quiet [enabled – Asus M4A89TD PRO/USB3 User Manual
Page 78: Asus core unlocker [disabled, C1e support [enabled, Northbridge chipset configuration, Dram controller configuration, Channel interleaving [xor of address bit, Memclk tristate c3/atlvid [disabled
3-22
Chapter 3: BIOS setup
Chapter 3
Cool‘n’Quiet [Enabled]
[Enabled]
Enables the AMD Cool’n’Quiet function.
[Disabled]
Disables this function.
ASUS Core Unlocker [Disabled]
[Enabled]
Enables the ASUS Core Unlocker to get the full computing power of the
processor.
[Disabled]
Disables this function.
C1E Support [Enabled]
[Enabled]
Enables the C1E support function. This item should be enabled in order to
enable the Enhanced Halt Sate.
[Disabled]
Disables this function.
NorthBridge Chipset Configuration
3.6.2
Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press <Enter> to display the submenu.
BIOS SETUP UTILITY
Advanced
NorthBridge Chipset Configuration
DRAM Controller Configuration
ECC Configuration
Primary Display Adapter
[PCI-E]
DRAM Controller Configuration
BIOS SETUP UTILITY
Advanced
DRAM Controller Configuration
Channel Interleaving
[XOR of Address bit]
MemClk Tristate C3/ATLVID
[Disabled]
Memory Hole Remapping
[Enabled]
DCT Unganged Mode
[Always]
Power Down Enable
[Disabled]
Channel Interleaving [XOR of Address bit]
Configuration options: [Disabled] [Address bits 6] [Address bits 12]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
MemClk Tristate C3/ATLVID [Disabled]
Configuration options: [Disabled] [Enabled]
Memory Hole Remapping [Enabled]
Configuration options: [Disabled] [Enabled]
Enable Channel Memory
Interleaving