Asus V2-AH2 - Manual (Page 5)

5 Quick installation guide Quick installation guide
English
Installing the CPU fan and heatsink assembly
1. Place the heatsink on top of the installed CPU.
1
2
3
4 5
IMPORTANT. Make sure that the fan and heatsink assembly perfectly fi ts
the retention mechanism module base; otherwise you can not lock the
retention bracket.
2. Attach one end of the retention bracket to the retention module base.
3. Attach the other end of the retention bracket (near the retention
bracket lock) to the retention module base until it clicks in place.
4. Push down the retention bracket lock on the retention mechanism to
secure the fan and heatsink to the module retention module base.
5. Connect the CPU fan cable to the connector on the motherboard.
CAUTION. Do not forget to connect the CPU fan connector! Hardware
monitoring error can occur if you fail to plug this connector.
NOTE. Your boxed CPU should come with installation instructions for the CPU,
fan/heatsink assembly, and the retention mechanism. If the instructions in
this section do not match the CPU documentation, follow the latter.
Retention module base Retention module base
CPU heatsink CPU heatsink
CPU fan CPU fan
Retention Retention
bracket lock bracket lock
Retention bracket Retention bracket
CPU fan connector CPU fan connector