AIPTEK GoProjector Manual - Manual (Page 7)

User’s Manual
2
EN
Charging the product
Connect one end of the bundled
USB cable to the Micro USB port
of the product and the other end to
PC / Notebook or Smart phone
USB power adapter for charging.
* After 5 hours the projector is
fully charged, the LED light will
be turned off.
Charging your MHL enabled phone
The internal battery of the projector can not only be used for projection, but
also charge your MHL enabled mobile device.
1. Please turn off projector before
charging MHL enabled phone.
2. Plug MHL cable into MHL port
of your mobile phone.
3. Press the charging mode
button to start charging.
y Only MHL enabled devices can
be charged via the embedded
battery of the projector.
y Please press charging button after
finishing MHL phone charge.
LED indicators
LED Status Indication
3 white LEDs stay on Power capacity is between 80% to 100%
2 white LEDs stay on Power capacity is between 45% to 80%
1 white LED stays on Power capacity is between 10% to 45%
1 white LED blinks Power capacity is below 10%
LED Marquee Projector is being charged
3 white LEDs blink Charging MHL enabled mobile phone
1.
2.
or