AIPTEK MobileCinema i20 - Manual (Page 11)

6
User’s Manual
EN
Troubleshooting
Symptom Check Point
The projector can not turn on. Ensure the battery is fully charged.
The projecting image is too
dark. * Use the Projector in a darker
environment.
* Decrease the size of projecting
image.
The projecting image is too
blurry. Adjust the focus by using focus
wheel.
The projector can turn on, but
the image can not be
projected. Ensure the App is equipped with
TV-out function.
The temperature of the
projector’s surface is warm. It is normal for this projector to
generate moderate heat during
normal operation.
When connecting the iPhone
to the projector and see the
error message displayed in
iPhone screen as below. If your iPhone is covered with a
protective case, it may cause a bad
connection between iPhone and
the projector.
Please remove the protective case
and connect it again.