AIPTEK X-mini - Manual (Page 9)

C
AR
C
AMCORDER
User’s manual
EN
www.aiptek.com Page 10
2.2 Installing in Vehicles
2.2.1 Mount to Windshield
1. Attach the device to the bracket
base. Turn and tighten the car
holder and the bracket base to
make sure the device is
securely locked in place.
2. With the suction-cup laying flat,
position the suction-cup on the
windshield.
3. Hold the base firmly on
the windshield and press
down the clamp to mount the car
holder to the windshield. Make
sure the base is securely locked
in place.
2.2.2 Adjust Device Position
Knob
Rotate the knob to swivel
the device vertically.
Knob
Rotate the knob to swivel the
device horizontally up to 360°.