Air Suspension C-2479 - Manual

1 C-2479RR REV A
Congratulations on your selection to purchase an Arnott Air Suspension System. We at Arnott
Air Suspension Systems are proud to offer a high quality product at the industries most
competitive pricing. Thank you for your confidence in us and our product.
Proper installation is essential to experience and appreciate the benefits of this system. Please
take a moment to review these installation instructions before you begin to install this system on
your vehicle.
It is equally important to be aware of all necessary safety measures while installing your new Air
Ride System. This includes proper lifting and immobilizing of the vehicle and isolation of any
stored energy to prevent personal injury or property damage.
“Engineered to Ride, Built to last”
WARNING: The air suspension system is under pressure (up to 10 bar, or
150 lbf/in ) verify pressure has been relieved and disconnect power to the air ride system
prior to disassembly. Do not allow dirt or grease to enter the system. Always wear
standard protective hand, ear, and eye protection when servicing the air
suspension system.
Kit contains:
PARTS LIST
P/N QTY DESCRIPTION
21-4498 2 SHOCK ABSORBER, FRONT
21-4499 2 SHOCK ABSORBER, REAR
14-4355 2 REAR COIL SPRING
Additional hardware needed, not supplied- hardware to cap the AHC lines.