Air Suspension Front Air Spring LINCOLN Continental 1995-1996 - Manual

INSTALLATION:
Congratulations on your recent purchase of the
Arnott 95-Top® replacement air spring for the 1995-
1996 Lincoln Continental. This air spring provides
proper vehicle handling and performance, in
accordance with the manufacturers specifications.
As with all products requiring assembly, proper
installation is essential in order to appreciate and
benefit from the products capabilities. Please take a
moment to review the instruction manual in order to
familiarize your self with the product’s components.
Please be aware of, and take all applicable safety
measures while installing your new air spring. The
illustrations and instructions within this manual are all
of the right side (passenger’s side) of the vehicle.
Installation of the left side assembly will follow the
same instructions. Any exceptions will be highlighted
and noted in bold text.
1995-1996
Lincoln Continental
Front Air Spring Installation
Manual
WARNING!
Do not inflate the air spring assembly while it is
unrestricted. The air spring assembly must be
restricted by the suspension system or another
adequate structure. Do not inflate the air spring
beyond 100 psi. Over inflation of the air spring, as
well as improper use of the assembly, may cause
severe personal injury or property damage.
Please do not exceed the maximum load
recommended by the vehicle manufacturer. (GVWR)
While the sir springs are rated by the manufacturer to
have a maximum pressure of 100 psi, this pressure
may allow too great a load to be carried on most
vehicles. For best results, load the vehicle and have it
weighed, then compare the vehicle weight with the
maximum allowed. Your vehicle owner’s manual or
data plate located on the inside of the driver’s door
will have the maximum loads listed. It is suggested
that all recommendations be followed for your own
safety and for the safety of the vehicle.
Parts List:
Air Spring Assembly
95-TOP 1 # 114 O-Ring 1
# 015 O-Ring 2 # 141 O-Ring 2
#23 x 4mm O-ring 1