Air Suspension AS-2394 - Manual

1 AS-2394RR
Congratulations on your selection to purchase an Arnott Air Suspension System. We at Arnott
Air Suspension Systems are proud to offer a high quality product at the industries most
competitive pricing. Thank you for your confidence in us and our product.
Proper installation is essential to experience and appreciate the benefits of this system. Please
take a moment to review these installation instructions before you begin to install this system on
your vehicle.
It is equally important to be aware of all necessary safety measures while installing your new Air
Ride System. This includes proper lifting and immobilizing of the vehicle and isolation of any
stored energy to prevent personal injury or property damage.
“Engineered to Ride, Built to last”
WARNING: The air suspension system is under pressure (up to 10 bar, or
150 lbf/in ) verify pressure has been relieved and disconnect power to the air ride system
prior to disassembly. Do not allow dirt or grease to enter the system. Always wear
standard protective hand, ear, and eye protection when servicing the air
suspension system.
Kit contains:
PARTS LIST
P/N QTY DESCRIPTION
AS-2394 1 AIR SHOCK ASSEMBLY
Addition hardware needed that is not included - 8” Tie Wrap
General information:
* Shocks not to be stored below 5 0 F (-15 0 C) and above 122 0 F (50 0 C).
*Avoid damage to air lines and cables.
*Removal and installation is only to be performed by full qualified personnel.
*Use car manufacturer’s diagnostic software.