Armasight NSMNYX1401F9DA1 NYX-14 FLAG MG Multi-Purpose Night Vision Monocular - Manual (Page 29)

29
CAUTION:
DO NOT forget to open the photoreceiver after completing your mission.
3.3.4 NYX-14 SHUT-DOWN
1. Turn the function switch to OFF. The green glow of the viewing area will fade to black.
2. Secure the lens cap over the objective lens.
3. If necessary, remove the unit from the rail (from the scope lens). Remove the unit by following the
mounting instructions in reverse..
4. Unscrew the battery cap and take out the battery. Replace the battery cap. Do not store the unit with
the battery still in it.
5. Store the unit and all accessories in the case.
3.4 STORAGE
3.4.1 PREPARATIONS FOR STORAGE
Prepare the NYX-14 for storage as follows:
1. Verify that the NYX-14 and all accessories are clean and dry before returning them to the storage
case.
2. Secure the cap over the objective lens.
3. Remove the battery.
4. Place the NYX-14 and accessories in the appropriate locations in the case, and close the cover.