AVSL 130.010 CAUHF-P13 - Manual (Page 2)

INTRODUCTION:
Thank you for choosing Mercury antenna. This antenna has an easy install design, which allows tool free
quick installation. The simple push and click design make this product ideal for both DIY and professional
installation. Please follow the steps below for assembly.
Step 1:
Pull the upper and lower beam on the main body outward fully until they click to lock in position.
Step 2:
Ensure the guide pin on the dipole box is facing the guide hole on the main body correctly and push the
dipole box on to the main body until it clicks to the lock on position.
Step 3:
Guide the reflectors into the reflector housing and push them into the housing until they click into the lock
in position.