AVSL 103.140 SA-2 - Manual (Page 3)

103.140UK User Manual
Operation
 Check mains for correct voltage as indicated near to the IEC mains inlet on the rear panel.
Connect to mains supply using the IEC cable provided.
 Connect the outputs A+B to speakers via binding posts, ensuring that the minimum
impedance is no lower than 4Ω per channel
 When using 4 x 8Ω speakers, connect the speakers in 2 pairs to each other and then
connect one of each pair to an amplifier channel output.
 Connect the sound source(s) to the appropriate 3.5mm jack or RCA input sockets
 With the “VOLUME” control turned down, switch the power on.
 Rotate the input rotary to select an audio source.
 Gradually increase the volume level and check for sound from speakers.
 Turn down the “VOLUME” rotary before switching off or unplugging the mains
Specifications