AVSL 153.110-153.114 Moving Message Display - Manual (Page 11)

11
TROUBLESHOOTING:
No display: Check if the power socket located at the back is connected
Ensure AC power plug is plugged in to the wall outlet
Check to see if the mains power in to the external power
supply is connected
No response to remote control: Check that the batteries in the remote have enough energy
Ensure the batteries are installed at the correct polarity
Ensure a clean line of sight between the remote and the
sign
No display but response Check if the AUTO ON/AUTO OFF time setting is correct
to the remote: Check you have information in the file RUN ??
Memory loss on the Sign Replace the internal memory battery (CR2032)
If the above does not help you then contact your local dealer.
COPYRIGHT PROTECTED by QTX Light Ltd UK
WWW.QTXLIGHT.COM