AVSL 154.009 SL-FC3, SL-36, SL-64, SL-SW, SL-Q8, SL-Q12 - Manual (Page 15)

SmartLIGHT User Manual Page 15
Once all the fixtures are setup turn the power on and set the DMX address on each
model to A001.
For users who wish to use the sound to light 4 light chase sequences set the DMX to
each of the following:
Connecting in 4’s
1
st PAR can = A001
2
nd PAR can = A007
3 rd PAR can = A013
4 th PAR can = A019
If you are connecting more than four in a chain either start again or work backwards.
Maybe try your own combination but note you may only connect up to a maximum of
32 PAR cans in any one sequence.