AVSL 952.710-952.717 BC SERIES - Manual

BCV-SERIES
100V Indoor Speakers
User Manual
BC3V 75mm (3”), 60Wmax
White 952.710
Black 952.711
BC4V 100mm (4”), 70Wmax
White 952.712
Black 952.713
BC5V 130mm (5.25”), 90Wmax
White 952.714
Black 952.715
BC6V 165mm (6.5”), 120Wmax
White 952.716
Black 952.717
Introduction
Thank you for choosing the BCV-series indoor speakers. These speakers have been designed to offer high
quality sound for 100V line or low impedance installations. Please read and follow the instructions in this
manual to achieve the best results and avoid damage through misuse.
Installation
The BCV-series speakers are each supplied with a wall-mounting bracket which
allows 90° lateral adjustment. When fixing to a wall or ceiling, use the bracket to
mark out the fixing points and use appropriate fixings for the substrate that the
speaker will be attached to, ensuring that the fixing is strong enough to bear the
weight load.
Once the bracket is fitted, support the speaker in position and attach top and bottom using the supplied
M6 screw caps and adjust to the required angle. Further M6 mounting points are available at the rear of
the speaker, should it be preferred to use different mounting methods (e.g. 129.130 – 129.124UK)