AVSL 100.060 DT2.18BT - Manual (Page 4)

USB/SD card MP3 player:
USB and SD card inputs are located on the top of the subwoofer. To start MP3 player function, please
follow these steps:
- Insert USB drive or SD card into the subwoofer into the corresponding socket.
- Press INPUT on the front of the subwoofer or press Mode on the remote control until USB/SD is
displayed on LCD display on the front of the subwoofer.
- Unit will read through the files and automatically play the MP3 files within the USB drive or SD
card.
- Pressing Play/Pause will pause the song if the unit is playing or start playing if the song is on
pause.
- To skip to the next song press NEXT/FORWARD. To fast-forward the song press and hold
NEXT/FORWARD
- To play the previous song, press PREVIOUS/REWIND. To rewind the song press and hold
PREVIOUS/REWIND.
LINE INPUT (analogue input):
- Press INPUT button until LINE is displayed on the LCD display.
- Use 3.5mm stereo jack to RCA adaptor lead provided, or plug directly into the 2 RCA inputs.
- Press play to play your music.
BLUUTOOTH:
- Press INPUT button until BLUE is displayed on the LCD display.
- Turn the Bluetooth option of your device (PC, smart phone, MP3 etc) ON.
- Perform search on nearby Bluetooth devices and look for “MSD_BT”. You may be asked for a
password when trying to connect, this is: 0000.
- Once Bluetooth is connected, there will be a “beep” from the speaker to confirm connection.
- If you have difficulty connecting, please refer to your device manual for how to switch on,
search and connect to Bluetooth.
- This is a duplex Bluetooth system which means the music playing can be control via the front
panel or the provided remote control.
- Pressing Play/Pause will pause the song if the unit is playing or start playing if the song is on
pause.
- To skip to the next song press NEXT/FORWARD. To fast-forward the song press and hold
NEXT/FORWARD
- To play the previous song, press PREVIOUS/REWIND. To rewind the song press and hold
PREVIOUS/REWIND.