AVSL 660.447 DC1230UK User Manual
AVSL Power suppliers
DC1230UK
12V Switch-mode Power Supply
Item ref: 660.447UK
User Manual
Function:
This energy efficient switch-mode power supply gives up to 3000mA at 12Vdc. Suitable for most
low power electronic products such as CCTV and LED installation tape.
Suitable for CCTV installation
Suitable for LED tape installation
Uses 25% less power making it more energy efficient
Materials used and manufacturing process are more environmentally friendly
Technical data:
Input Voltage:
AC 100 - 240V 50/60Hz
Output Voltage:
DC 12V
Output current:
3000mA max.
Adaptor plug size: 2.1mm + centre
Output power:
36W
Instructions:
1.
Please read these instructions fully before using this apparatus.
2. For office equipment use only.
3.
Check the housing and the mains cable for damage.
4.
Connect the unit to be powered, check the polarity, voltage and connector size are correct
for your device, failing to do this, could result in damage to your equipment.
5.
The unit to be powered must not draw more current than the maximum continuous
current of the power supply, in order to prevent overload. (The continuous current draw,
should be no more than 80% of the output current max.).
6.
Plug the power supply into a wall outlet, the Red LED will light.