AVSL 660.449 LT-138PUK User Manual

AVSL Power suppliers

Advertising
background image

LT-138PUK

Switch-mode Power Supply

Item ref: 660.449UK

User Manual

Function:

This high power switch-mode power supply gives up to 8500mA at 13.8Vdc. Suitable for LED tape
installation. Note: This product is for professional installation only.

Suitable for LED tape installation

Technical data:

Input Voltage:

AC 220 - 240V 50Hz

Output Voltage:

DC 13.8V

Output current:

8500mA max.

Adaptor plug size: 2.1mm + centre

Output power:

100W

Instructions:

1.

Please read these instructions fully before using this apparatus.

2. For office equipment use only.

3.

Check the housing and the mains cable for damage.

4.

Connect the unit to be powered, check the polarity, voltage and connector size are correct
for your device, failing to do this, could result in damage to your equipment.

5.

The unit to be powered must not draw more current than the maximum continuous
current of the power supply, in order to prevent overload. (The continuous current draw,
should be no more than 80% of the output current max.).

6.

Plug the power supply into a wall outlet, the Red LED will light.

Advertising