AVSL Citronic CDM10:4 User Manual
Page 5
171.135UK User Manual
Introduction
The following pages give a full description of the connectors and their purpose. You should study this
carefully before you power up the mixer to ensure you get the best performance from the CDM10:4.
Cables & Connectors
Always use good quality cables and connectors. Over 75% of all problems with DJ systems are
simple connector issues. Don’t get caught out.
Switching on your system
Always turn on your mixer and input devices before you turn on the amplifier. The CDM10:4 has
been designed not to harm your amplifiers or speakers if you turn them on first, but this may not be
true of the inputs plugged into the mixer. Play Safe and always turn your amplifiers on last.
Power Supply
The power supply for the CDM 10:4 is built into the mixer and is supplied with a BS approved IEC
mains plug specifically for use in the UK. If it does not match the power socket you wish to use check
with your dealer before you plug it in. It is possible you could damage your mixer if it is not the
correct version.
Crossfader
This is commonly the most used feature on your mixer. Even though a great deal of care has been
taken in the choice of components for this function, it is the most likely thing to wear out first on
your mixer. So we’ve made it quick and easy to replace.
Connection Guide