AVSL Citronic MINI:MIX2.0 - Manual (Page 2)

172.756UK User Manual
Introduction
Thank you for choosing a Citronic Mini:Mix-2.0 USB mixer. This product has been designed to
offer reliable, high quality and convenient mixing for DJ and podcasting applications. In order
to gain the best results from this equipment and avoid damage through misuse, please read
and follow these instructions and retain for future reference.
Warning:
To prevent the risk of fire or electric shock, do not expose components to rain or moisture.
If liquids are spilled on the surface, stop using immediately, allow unit to dry out and have
checked by qualified personnel before further use.
Avoid impact, extreme pressure or heavy vibration to the unit.
There are no user serviceable parts inside the mixer – refer all servicing to qualified personnel.
Placement
 Keep out of direct sunlight and away from heat sources.
 Keep away from damp or dusty environments.
 Ensure adequate access to controls and connections
Cleaning
 Use a soft cloth with a neutral detergent to clean the casing as required
 Use a soft brush to clear debris from the control surface
 Do not use strong solvents for cleaning the unit.
Specifications
Power supply 5Vdc 500mA (USB 2.0)
Gain (Channel A-B) -20 to 0dB
Headphone impedance 32 ohms
Frequency response 20Hz-20kHz
Total harmonic distortion > 0.1%
Signal to noise ratio > 80dB
Channel separation 55db (1kHz)
Line Sensitivity 1V,10k ohms
MIC Sensitivity 20mV 600 ohms
Line output 2.0V, 600 ohms
REC output 2.0V, 600 ohms
Dimensions 150 x 130 x 55mm
Weight 500g