Connection guide, Operation – AVSL Citronic PRO-2 MKII User Manual
Page 5
PRO-2 MKII User Manual
Connection Guide:
Operation:
•
Only use the supplied power supply.
•
Connect any turntables to the RCA PHONO inputs on ch.1 and ch.2.
•
Earth turntables (unless they are self-grounded) to the case grounding point on the rear
panel
•
Connect CD, CD+G, laptop, TV decoder, DVD or MP3 players to LINE inputs.
•
Connect DJ mic and headphones at the front.
•
With MASTER LEVEL, MICROPHONE LEVEL, CHANNEL FADERS and GAINS Turned down,
switch the power on.
•
Gradually increase the GAIN, MASTER LEVEL and CHANNEL FADERS and check the output
level on the VU indicator. Set the levels so that the first red lights light up intermittently.
•
Be aware that the CROSSFADER also operates across channels 1 & 2.
•
To use CROSSFADER move left and right to seamlessly blend between these 2 channels.
•
Gradually increase the microphone channel levels to check microphone signals.
•
Monitor each stereo channel via headphones. Rotate the CUE MIX knob to monitor between
ch1 and CH2.
•
Adjust Hi, and Lo EQ settings to set the desired tonal effect
•
Adjust MICROPHONE LEVEL Hi and Lo EQ to set the tone to suit.
•
When not being used, turn down the Vocal mic levels to avoid unwanted noise.