AVSL 174.225 FL-50 - Manual

FL-50 Flanger Pedal
174.225UK
Functions
1. DEPTH
– Adjusts the intensity of the flanging effect
2. RATE – Varies the modulation speed of the flanger
3. RES – Adjusts the resonance by re-feeding the flanger effect into itself, varying the focus of
the effect
4. Output
– 6.3mm mono jack connector
5. D.C. In
– DC jack for optional mains adapter
6. Input
– 6.3mm mono jack connector
7. Indicator LED
– Shows when effect is on (when it appears dim, replace battery)
8. Pedal Switch – Turns Effect On/Off
9. Battery housing – Compartment underneath for 9V battery
Notes on use

Connecting to the Input jack enables the battery, please disconnect when not in use to
preserve the battery

Before connecting to an instrument, ensure amplifier volume is turned down
Specifications

Input Impedance: 470k Ω

Output Impedance: 10
kΩ

Residual Noise: 90dBu (IHF A, Typ)

Power Supply: 9Vdc (battery or optional mains adapter) 15mA
© chord 2009
www.chordmusicuk.com