Babyliss SL31 Electronic Monitoring Scale - Manual (Page 10)

- 0 -
Guest mode:
• Place the scale on a hard, level and flat surface
• Quickly and firmly tap center of scale platform with
foot to activate digital display.
• Wait until the screen displays “00.0KG”
• The scale is ready to be used
• Step onto the scale
• “000” will flash
• Your weight will be displayed on the screen and will
remain displayed for a few seconds
• The scale will go out automatically after a few seconds.
User mode:
• Before the first use, the scale should be programmed
by the user (cf. PROGRAMMING section).
• Place the scale on a hard, level and flat surface.
• Using your foot, press the button corresponding to
your user number.
• The screen will display your user number and
“00.0KG”.
• The scale is ready to be used.
• Step onto the scale.
• “000” will flash on the screen.
• Your weight, your BMI, the difference in weight com-
pared to the previous weighing (indicated by “∆ Kg”)
and the coloured indicator related to this difference
are instantly displayed for a few seconds.
Note: When using the scale for the first time, change in
weight ( ΔKG) will show «0.0».
• Your weight is automatically saved in the memory of
the scale. The scale will beep to confirm the informa-
tion has been saved.
• The scale will go out automatically after a few seconds.
INTERPRETING THE DATA:
a. Change in weight (∆ Kg)
The scale records your weight after each use. It auto-
matically recalls this information to calculate the
change in weight between the current and the
previous weighings. This difference is then instantly
transcribed into kilograms on the screen and the
extent of this change appears in the form of a coloured
indicator according to the table below.