C2G 26854 Network Cable Tester-Pro - Manual (Page 2)

5
2
6
11
1
NOT FOR LIVE CIRCUITS
N e t w o r k C a b l e T es t e r - E
NO LIGHT=OPEN
RED=BAD
GREEN=GOOD
9
10
GND
NO LIGHT=BAD
GREEN=GOOD
1-2 7-8 4-5 3-6
BNC
4
7
8
3
1 Master Unit RJ-45 socket
2 Master Unit BNC
3 Remote Unit RJ-45 socket
4 Remote Unit BNC
5 Pair 1-2 good/bad LED
6 Pair 3-6 good/bad LED
7 Pair 4-5 good/bad LED
8 Pair 7-8 good/bad LED
9 Ground
10 Remote Unit
11 Master Unit
3
7
GND
8
4
6
5
2
1
3
7
GND
8
6
4
5
1
2
GND
4
6
3
2
1
8
7
5
3
GND
7
8
6
4
5
1
2
The Network Cable Tester-E is designed to test quickly, the most popular cable wiring that uses twisted
pairs, such as TIA568A/568B,Token Ring and 10/100BASE-T (STP/UTP). It will automatically test the
cables once they are plugged into the master and remote unit. It will also test coaxial cables. It can test
CAT 5 & 6 cables for shorts, miss wiring, reversed and ground by the following test procedures.
Network Cable Tester - E
Model No. 251450/E
Continuity test:
Step 1. Install the 9V alkaline battery in the rear battery compartment.
Step 2. Plug both ends of the RJ-45 or BNC cable into the sockets of the tester. One in the Master unit and
the other into the remote unit
Step 3. After the cable is plugged into the tester, the LED's on the tester will turn either green, red or no
light. Any LED'S not green show a fault on the twisted pair. A green light on the BNC cable means
the cable is good while a no light means the cable is bad.
RJ-45 Fault Status Red : Short, Reversed or Miss wire
RJ-45 Fault Status No Light : Open
BNC Fault Status No Light : Short Open
Any LED's displaying red or no lights mean the cable is miss-wired, open or shorted or reversed.
Check the cable connections again and start the tests from Step 2.
Features a Remote
Unit that slides onto
the Master Unit
NetworkCableTester-E
7-8
GREEN=GOOD
NO LIGHT=BAD BNC
3-6 4-5 1-2 GND
NetworkCableTester-E
NO LIGHT=BAD GREEN=GOOD
7-8 1-2 4-5 3-6
BNC
GND
3
GND
7
8
6
4
5
1
2
3
8
7
GND
5
4
6
2
1
NetworkCableTester-E
BNC
3-6 1-2 GND 4-5 7-8
GREEN=GOOD
NO LIGHT=BAD
=
green light
=bad no light
red light
=
bad
good