C2G 26847 LANtest Pro 256652 User Manual
Page 2
Contents
Page
1. Introduction
1
2.
Features
1
3.
4.
.
.
5
. Product Profile
5
11. Fault Status
8
. Battery Replacement
. Warning
LANtest Pro
LANtest Pro Specifications
2
LANtest Pro Cable Test Operation
3
5
LANtest Pro Tone Generator Operation
3
6
LANtest Pro Remote ID Operation
4
7. Probe Features
4
8. Probe Specifications
9. Probe Operation
5
10
Introduction
Congratulations on your purchase of the LANtest Pro
network cable tester series! The LANtest Pro is a small
hand-held cable tester, which enables network professionals
to quickly and easily verify the integrity of Ethernet twisted
pair cables. In one step, the LANtest Pro will test twisted
pair cables for open pairs, shorted pairs, reversed pairs,
crossed pairs and split pairs. Just push the TEST button, and
the LANtest Pro will automatically scan for any existing
faults in your cable. The specially designed remote
terminator is provided for one-person testing of installed
cables. The tone generator function can be used to send a
signal through your installed cables which can be traced with
the Probe or any cable tracer in the market.
Package Contents:
For 256652/IDT & 256652/LBT Users can buy 256712A or
256712F to Upgrade the tone function
Item Number Remotes Manual Soft carry case Probe Probe with filter
256652/LB
256652/LBT
1 Y Y N N
1 Y Y N N
4 Y Y N N
1 Y Y Y N
1 Y Y Y Y
256652/IDT
256652/TK
256652/TFK
LANtest Pro Features
Tests for wiring faults of open, short, reversed, crossed and
split pairs
Split pair fault detection at a minimum 40cm cable length
Testing of twisted pair cables to over 450ft
Tone generator for tracing installed cables and locating
faults (available on models 256652/LBT, 256652/TK,
256652/TFK and 256652/IDT)
Identification of up to 4 remote termination units (available
1
1
1
2
3
3
4
4
5
5
5
8
9
9