C2G 29353 USB V1.1 RECEIVER DONGLE RJ45 TO USB BM - Manual (Page 6)

5
Step 1
Install the USB transmitter (29349, 29344, or 29348) by means of wall plate (if using the wall plate style
transmitter) or connect the dongle style transmitter to your computer.
Step 3
Use a pre-terminated Cat5/Cat5e/Cat6 cable or terminate your own cable, and connect the USB
transmitter and USB v1.1 Receiver Dongle.
Step 4
Plug your computer into the source end (USB transmitter unit) using a standard USB A/B cable.
Step 5
Plug the USB v1.1 Receiver Dongle USB B male connector into your device.
Step 6
Turn your computer/source on and you can begin to use your USB devices.
D
EVICE
I
NSTALLATION