C2G 29599 WIRELESS AV ADAPTER - Manual (Page 14)

13
V ERIFY C ONNECTION
To verify connection from Cable or PIN Association, you can open the Wireless USB host manager utility
and you should have an icon displayed representing the TruLink Wireless AV Adapter.
W
IRED M ODE
Your Wireless AV Adapter can also be used wired mode.
1. Position the WIRELESS/WIRED switch in the WIRED position.
2. Plug the USB cable between your computer and the Wireless AV Adapter. If not already installed,
Windows will automatically install the necessary drivers.
3. If prompted to Accept Association, please do so, and then disconnect the USB cable. The function is
the same as the wireless mode but data will be transferred through the USB cable and not use the
Wireless USB host adapter. You are now ready to use your TruLink Wireless AV Adapter.
S OFTWARE /D EVICE I NSTALLATION