C2G 39977 USB 2.0 EASY TRANSFER CABLE FOR WINDOWS - Manual (Page 23)

22
Step 6
After the new WET program has been copied to the USB flash
drive, you will be prompted to plug the USB flash drive to the
old computer and run the new Windows Easy Transfer
program on the old computer. Refer to the next section to
begin the transfer process from your old PC to the Windows 7
PC using WET. Leave the below window screen in Windows
7 and click Next after you have setup the connection on the
old PC.
Step 7
Plug the USB flash drive to your old PC (Windows XP or Vista) and
run the WET shortcut program, or you can click “Install Windows
Easy Transfer onto your old PC” if the AutoPlay window pops up.
If you are connecting two Windows 7 PCs, you can skip this first
step and go to the next step below.
Note: If you are using Windows XP on your old PC, make sure you
have installed the original WET program to include the transfer
cable driver to your PC.
U
SING THE
W
INDOWS
E
ASY
T
RANSFER
P
ROGRAM FOR
W
INDOWS
7