C2G 30709 Wireless Network Adapter - Manual (Page 24)

Wireless network adapter User manual
Page 24 of 26
Figure 6-12
The Complete Screen will appear. Click Finish button.
You have successfully created a connection profile.
Chapter 7 Troubleshooting
This chapter provides solutions to problems that may occur during the installation and operation of the
Wireless Cardbus/PCI Adapter. Read the descriptions below to solve your problems.
1. The Wireless Cardbus/PCI Adapter does not work properly.
z Reinsert the Wireless Cardbus/PCI Adapter into your PC’s PCI slot/Cardbus slot.
z Right click on My Computer and select Properties. Select the device manager and click on
the Network Adapter. You will find the Adapter if it is installed successfully. If you see the
yellow exclamation mark, the resources are conflicting. You will see the status of the
Adapter. If there is a yellow question mark, please check the following:
z Make sure that your PC has a free IRQ (Interrupt ReQuest, a hardware interrupt on a PC.)
z Make sure that you have inserted the right adapter and installed the proper driver. If the
Adapter does not function after attempting the above steps, remove the adapter and do the
following:
z Uninstall the driver software from your PC.
z Restart your PC and repeat the hardware and software installation as specified in this User
Guide.