C2G 27477 JetLAN Print Server for Windows 98_Me_NT_2000_XP - Manual (Page 2)

4) The next screen gives you the choice of two different software components, as shown below:
- Network Print Monitor is the standard drivers that should be used for the print server in the
Windows environment. Most users should install this component.
- PSAdmin is an administration utility. It is useful for troubleshooting and configuration of the print
server. We recommend that you install it on at least one of the computers on the network.
5) Make your selection, and click Next.
6) Please wait while the files are installed. At some point you will be asked for Disk 2. Insert the Setup
Disk for NetWare Windows 95/98/NT/2000 Disk 2 and click Ok.
7) The Setup program is complete. Click Finish.
Software Configuration
Now that you software is installed, you need to create the network port that you will print through.
1) Click on “Start”, then “Settings”, then “Printers”. Right-click your printer’s icon and select
“Properties”.
2) Click the “Details” tab (Windows NT and 2000 users click the “Ports” tab). Click the “Add Port”
button.
3) On the next window, select “Network Print Port”. See below:
Windows NT/2000/XP Printer Port Window:
Select “Network Print Port” and click “New Port”.