C2G 29503 VGA MONITOR SPLITTER_EXTENDER - Manual (Page 7)

6
One HD15 male to male (M/M) cable is
required to connect from the Video Splitter
input to a computer’s VGA output. Multiple
monitors should be connected to the Video
Splitter’s output ports as shown below with
HD15 cables.
The ACTIVE LED turns on when there is a
video signal at the Input port. The POWER
LED turns on when the Video Splitter is
powered up by the AC 9V power adapter.
D
EVICE
I
NSTALLATION
Figure 1: 29503 Connection Diagram
Figure 2: 29504 Connection Diagram