C2G 40697 Deluxe Component Video_Digital Audio 6 In_2 Out Matrix Switch - Manual (Page 4)

Features:
• Two Component Video / TOSLINK Outputs
Allow you to connect up to six sources to any two devices such as a TV or an AV
receiver
• Component Video Inputs
Support HDTV quality video
• TOSLINK Optical Inputs
Let you connect TOSLINK digital optical cable for multi-speaker theater sound tracks.
• Standard Stereo RCA Connectors
Make connecting L/R audio cables simple providing stereo sound
• Easy Selection Illuminating Push-Buttons
Front panel buttons features tri-color LED for quick input/output identification.
• Slim Line Remote Control
The matrix switch comes complete with an infrared (IR) remote control that features
discrete commands to make programming complex macros into your universal remote
control system a snap.
Connecting Devices:
Use a component video cable with RCA plugs (not supplied) for all component video
connections. For optimal performance, use high-quality audio video cables. Do not use audio
cables for transmission of video signals.
The switch’s color-coded jacks make it simple to connect devices to the switch. Green – blue
– red jacks (marked as Y, Pb and Pr) are used for component video, red jacks are for right
channel audio and white jacks for left channel audio.
Before connecting the switch to your digital audio equipment, make sure you perform the
following tasks:
•
Power down all components that will be connected to this switch
z
Remove the plastic plug that protects the switch’s optical TOSLINK jack from dust. Keep
plastic plug for future use.
z
Remove the cable end protectors from the TOSLINK connector on your TOSLINK optical
cable (not supplied).
Follow these steps to connect the components to the switch.
2