C2G 40477 HDMI OVER CAT5E EXTENDER - Manual (Page 7)

6
Step 1
Make sure that your HDMI enabled device and televisions/monitors are turned off.
Step 2
Using an HDMI cable (not included), connect the HDMI output of your source device to the HDMI input
on the HDMI over Cat5e Transmitter unit.
Step 3
Using an HDMI cable, connect the HDMI output of the HDMI over Cat5e Receiver unit to your display
device.
Step 4
Attach two Cat5e cables from the RJ45 (1) and RJ45 (2) on the HDMI over Cat5e Transmitter to the
RJ45 (1) and RJ45 (2) on the HDMI over Cat5e Receiver.
Step 5
Connect the supplied power adapter to the HDMI over Cat5e Receiver and into a power outlet. The
RJ-45 LEDs will be illuminated indicating the signal is active.
Mounting brackets are included in the package to the Receiver and Transmitter units if you wish to
make the units stationary.
D
EVICE
I
NSTALLATION