C2G 40324 3-PLAY - Manual (Page 2)

INTRODUCTION
The Impact Acoustics™ 3-Play™ connects up to 3 TOSLINK
digital audio, 3 stereo analog audio pairs, and 3 component video
(770.3) signals to a single component video input. Experience loss-
less control from as many as 3 HDTV or progressive scan source
components! 3-Play gives you the power of choice and the
convenience of control! This component is ideal for connecting
DBS Satellite, DVD and ATSC Tuners to home theater receivers
and pre-amp/processors.
FEATURES
• 3 Inputs for Component Video, TOSlink Digital Audio and
Analog Stereo Audio
• Use for Video Game Systems, DVD Players and HDTV
Receivers
• Wireless IR Remote Control or front panel selection
• Compact size fits anywhere, only 9-1/2" x 4-1/4" x 2" (W x
D x H)
CONTENTS
• 3-Play Selector
• IR Remote Control w/Battery
• Power Adapter
INSTALLATION
1. Turn power off for all devices before making connections
2. Connect up to 3 component video sources, 3 TOSlink or 3
stereo audio sources
3. Connect the output to your television or display
4. Remove the protection tab from the remote control’s
battery
5. Turn the power on using the remote control or front panel
switch
6. Select the video input using the remote control or front
panel switch
NOTE: Audio signals may be combined but this unit does not
convert audio signals from analog to digital. If the source signal is
stereo audio the output will be stereo audio. If the source is
TOSlink the output will be TOSlink.