Xoro HRT 5000 - Manual (Page 62)

22 HRT 5000
Engl
ish
Recorder
You can schedule recordings on different ways. Either you use the EPG function or lead to program
manually.
The scheduled recordings start out well from the stand-by mode. Thus the HRT 5000 after the capture
goes into standby mode, you should still check an option to realizes them. Press the MENU button
and go to Media+. Select the submenu there in the setting DVR setting. Find the option Standby mode
and make sure that this enabled (On).
The programming from EPG
The timer can be programmed directly from the
EPG message out. Press the EPG button and
select in the EPG window TV station andTV
program.
Then press the RECORD button and the Timer
Programming opens with the data information
from EPG.
Here you can execute a manually programming.
•
Timer Number - There are 8 timers that
can be set.
• Timer Mode - Off, Once, Daily, Weekly,
Monthly.
• Timer Service - It allows you to choose
either TV or Radio services.
• Wakeup Channel - You can choose a
channel to set for wakeup.
• Month - Month can be set in Once
mode.
• Date - It can be set in either Once or
Monthly mode.
• Day - It can be set in Weekly mode.
• Time - It is used to set start time for a
particular show.