Xoro HSD 8420 - Manual (Page 48)

12
English
OPERATION
StandBy
When you press the button, the player will switch to Standby status, then the power
indicator on the front panel will be light. When pressed again, the player is returned to
normal working status.
Note:
should you not wish to use the player, please switch off the power by pressing the power
button.
PBC
Press the PBC button, under the VCD state. If you choose off, you can choose the VCD
open, if you choose on that you can not choose VCD open.
Press |<< / >>| button on remote control during playback. A chapter (DVD) or a track (CD) is
skipped back or ahead correspondingly each time the button is pressed.
Press << / >> button on the remote control during playback and the unit will enter fast
forward/reverse status There are 4 speeds of fast forward (reverse) available: x2, x4, x8,
x16 and x32. To return to normal play, you can press again or press PLAY button on player
or remote control.
Notes:
1.
Some discs do not have such function
2. For some MPEG4 discs, the speed levels of fast forward (reverse) will only have x2
or x4.
Press SLOW button on the remote control during playback and the unit will enter slow
forward/reverse status. There are 4 speeds available: 1/2, 1/4, 1/6 and 1/8. To return to
normal play, you can press again or press PLAY button on player or remote control again.
Note:
Some discs do not have such function
Press STEP button during play, the player will enter the still picture mode. If the button is
pressed again, the disc is advanced by one frame (step). When the button is kept pressed,
consecutive frame advance works. To return to normal play, press PLAY button.
Note:
Some discs do not have such function
NOTE:
During the playing of the introduction of a movie, STEP, >>, <<, SLOW, |<< , >>| may be
ineffective.
Play
Skipping Tracks