Installation, Start-up and use, Positioning and connection – Hotpoint Ariston SDSY 17xx V x User Manual

Page 21: Starting the appliance, Navigating the display, Using the refrigerator to its full potential

Advertising
background image

GB

21

Installation

! Before placing your new appliance into operation please read
these operating instructions carefully. They contain important
information for safe use, for installation and for care of the
appliance.
!

Please keep these operating instructions for future reference.

Pass them on to possible new owners of the appliance.

Positioning and connection

Positioning
1. Place the appliance in a well-ventilated humidity-free room.
2. Do not obstruct the rear fan grills. The compressor and

condenser give off heat and require good ventilation to operate
correctly and save energy.

3. Leave a space of at least 10 cm between the top part of the

appliance and any furniture above it, and at least 5 cm between
the sides and any furniture/side walls.

4. Ensure the appliance is away from any sources of heat (direct

sunlight, electric stove, etc.).

5. In order to maintain the correct distance between the appliance

and the wall behind it, fit the spacers supplied in the installation
kit, following the instructions provided.

Levelling
1. Install the appliance on a level and rigid floor.
2. If the floor is not perfectly horizontal, adjust the refrigerator by

tightening or loosening the front feet.

Electrical connections
After the appliance has been transported, carefully place it
vertically and wait at least 3 hours before connecting it to the
electricity mains. Before inserting the plug into the electrical socket
ensure the following:

• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance,

which is indicated on the data plate located on the bottom left
side of the fridge (e.g. 150 W).

• The voltage must be in the range between the values indicated

on the data plate located on the bottom left side (e.g. 220-240V).

• The socket is compatible with the plug of the appliance. If the

socket is incompatible with the plug, ask an authorised
technician to replace it (

see Assistance

). Do not use extension

cords or multiple sockets.

!

Once the appliance has been installed, the power supply cable

and the electrical socket must be easily accessible.
!

The cable must not be bent or compressed.

!

The cable must be checked regularly and replaced by authorised

technicians only (see Assistance).
!

The manufacturer declines any liability should these

The manufacturer declines any liability should these

The manufacturer declines any liability should these

The manufacturer declines any liability should these

The manufacturer declines any liability should these

safety measures not be observed.

safety measures not be observed.

safety measures not be observed.

safety measures not be observed.

safety measures not be observed.

Start-up and use

Starting the appliance

! After transportation of the appliance, carefully place it in an upright

position and wait at least 3 hours before connecting it to the
electricity mains, to make sure it operates as it should.
• Clean the inside of the refrigerator well using warm water and

bicarbonate of soda before placing food inside it.

• The appliance comes with a motor protection control system

which makes the compressor start approximately 8 minutes
after being switched on. The compressor also starts each time
the power supply is cut off whether voluntarily or involuntarily
(blackout).

Refrigerator Compartment
When the appliance is switched on the refrigerator compartment is
set to its default value of +5°C. We recommend that the SUPER
COOL function is set in order to accelerate the cooling process of
the compartment. After a few hours it will be cool enough for food to
be placed inside.

Navigating the display

Setting the temperatures:
If the product is switched on, the refrigerator compartment display
will indicate the temperature value set at that moment. To change
them, simply press the - and + buttons More specifically, each time
the buttons are pressed, the temperature increases or decreases
and the level of cold generated inside the compartment is adjusted
accordingly. The temperature values that may be selected for the
refrigerator compartment are +8°C, +7°C, +6°C, +5°C, +4°C, +3°C
and +2°C, If SUPER COOL function is activated, Fridge
temperature cannot be modified.

Using the refrigerator to its full potential

• Adjust the temperature using the display.
• Activate the SUPER COOL function to lower the temperature

quickly, for example, when you place a large number of new
food items inside a fridge and the internal temperature rises
slightly. This function quickly cools the groceries by temporarily
reducing the temperature until it reaches the ideal level.

• Place only cold or lukewarm foods in the compartment, never
hot foods (see Precautions and tips).
• Remember that cooked foods do not last longer than raw

foods.

• Do not store liquids in open containers: they will increase the

level of humidity in the refrigerator and cause condensation to
form.

SHELVES:

with or without grill.

Due to the special guides the shelves are removable and the height
is adjustable , allowing easy storage of large containers and food.
Height can be adjusted without complete removal of the shelf.

Static
Models without the Aircooler have the cooling section in the internal
back wall of the compartments. The wall will be covered in frost or
water droplets depending on whether the compressor is operating
or paused: both cases are normal. If the TEMPERATURE
ADJUSTMENT knob has been set on high values with large
quantities of food and with a high ambient temperature, the
appliance can operate continuously, resulting in excessive frost
formation and excessive energy consumption: compensate for this
by shifting the knob towards lower values (defrosting will occur
automatically).
In static appliances, the air circulates in a natural way: the colder air
tends to move downwards as it is heavier. The food should be
stored as follows:

Food

Arrangement inside the
refrigerator

Fresh fish and meat

Above the fruit and vegetable bins

Fresh cheese

Above the fruit and vegetable bins

Cooked food

On any shelf

Salami, loaves of bread,

chocolate

On any shelf

Fruit and vegetables

In the fruit and vegetable

compartment bins

Eggs

On the shelf provided

Butter and margarine

On the shelf provided

Bottles, drinks, milk

On the shelves provided

Advertising