Braun 7180 Silk-épil Xpressive - Manual (Page 10)

11
when sliding the appliance over the skin).
Thorough cleaning of the epilation head
before each use will minimise the risk of
infection.
If you have any doubts about using this
appliance, please consult your physician. In
the following cases, this appliance should
only be used after prior consultation with a
physician:
– eczema, wounds, inflamed skin reactions
such as folliculitis (purulent hair follicles)
and varicose veins,
– around moles,
– reduced immunity of the skin, e.g. diabetes
mellitus, during pregnancy, Raynaud’s
disease, haemophilia, candida or immune
deficiency.
Some useful tips
If you have not used an epilator before, or
if you have not epilated for a longer period
of time, it may take a short time for your
skin to adapt to epilation. The discomfort
experienced in the beginning will decrease
considerably with repeated use as the skin
adapts to the process.
Epilation is easier and more comfortable
when the hair is at the optimum length of
2-5 mm. If hairs are longer, we recommend
that you either shave first and epilate the
shorter, re-growing hairs after 1 or 2 weeks.
When epilating for the first time, it is
advisable to epilate in the evening, so that
any possible reddening can disappear
overnight. To relax the skin we recommend
applying a moisture cream after epilation.
Fine hair which re-grows might not grow
up to the skin surface. The regular use of
massage sponges (e.g. after showering) or
exfoliation peelings helps to prevent in-
growing hair as the gentle scrubbing action
removes the upper skin layer and fine hair
can get through to the skin surface.
Description
1a Massage system
1b Efficiency cap
1c Beginner cap
2 Epilation
head
3 «smartlight»
4
Switch with lock keys (4a)
5 Release button
6 Special cord set
Preparing for use
Your skin must be dry and free from grease
or cream.
Before use, always make sure that epilation
head is clean.
Always make sure that the epilation head
(2) is provided with a cap.
To change caps, press their lateral ribs and
pull off.
To change heads, press the release button
(5).
How to epilate
1 Turning on
Press one of the lock keys and turn the
switch clockwise to setting 2 (optimum
setting). For reduced speed, choose
setting 1 (soft setting).
The «smartlight» comes on instantly
and shines as long as the appliance is
switched on. It reproduces an almost
daylight condition, thus revealing even
the finest hair and giving you a better
control for improved epilation efficiency.
•
•
•
•
•
•
•
98759947_SE_7180_MN.indd 11 98759947_SE_7180_MN.indd 11 01.07.2008 11:21:41 Uhr 01.07.2008 11:21:41 Uhr