Acer M230A - Manual (Page 9)

English
9
Connecting the power cord
 Connect the AC cord to the AC input on the back of the monitor.
2 Connect the plug to the wall outlet as shown.
Basic connections
Setting up the remote control
 Open the cover on the bottom of the remote unit.
2 Insert two AA batteries (supplied) to match the polarity indicated inside the battery
compartment.
A certified power cord that meets your country's legal requirements must
be used with this monitor. You may also use an ordinary polyvinyl cord that
meets IEC 60227 requirements or a synthetic rubber cord that meets IEC 60245
requirements.